金洋|娱乐

                    Properties* Aluminum Polyethylene Polypropylene Impact (rubber-modified) Ethylene Vinyl Acetate FlexTemp Thermoplastic Rubber Silicone Rubber Vinyl
                    Low-Density High-Density Standard High-Temp
                    Mechanical Characteristics
                    Specific gravity (density) 2.73 0.910 – 0.925 0.941 – 0.965 0.890. – 0.91 .920 – .950 .940 – .960 1.18 1.2 1.2
                    Tensile strength, p.s.i. 31 – 42 600 – 2300 3100 – 5500 2800 – 4400 1440 – 2500 2400 – 3100 200 – 1500 2300 2100
                    Elongation, % 20% min. 90.0 – 800.0 20.0 – 1000.0 350.0 – >500.0 550 – 900 500 – 620 700 400 270
                    Compressive strength, p.s.i. 11 2700 – 3600 4000 – 6500
                    Tear strength (ASTM D1004) 200pli 185pli 270pli
                    Impact strength, ft. lb./in. of notch (1/2x1/2 in. notched bar, izod test) No break No break 0.5 – 20.0 1.0 – 15.0 @ 73°F No break
                    Hardness, Rockwell D41 – D46 (Shore) R10 D60 – 70 (Shore) R50-R85 D17 – 45 (Shore) A25 – 80 (Shore) A60 – 70 (Shore) A80 – 90 (Shore)
                    Electrical Characteristics
                    Volume resistivity, ohm/cm3 (50% RH and 23°C) >1016 >1016 >1015 >1015
                    Dielectric constant, 60 cyc. 2.25 – 2.35 2.30 – 2.35 2.3 2.50 – 3.16
                    Dissipation (power) factor, 60 cyc. <0.0005 <0.0005 >0.0003 >0.0030
                    Service Temperatures
                    Continuous °C/°F 343/650 66/150 74/165 121/250 60/140 132/275 232/450 93/200 149/300
                    Intermittent °C/°F 343/650 79/175 102/215     149/300 316/600 177/350 246/475
                    Brittleness °C/°F -70/-94 <-70/<-94 -18/0 <-70/<-94 <-68/<-90 0 -32/-29 -32/-26
                    Resistance Characteristics
                    Water absorp., 24 hr., 1/8" thick, % 0 <0.015 <0.01 <0.01 .05-.13 <.10
                    Burning rate (flammability), in./min. Very Slow (1.04) Very Slow (1.00 – 1.04) Slow Slow Very Slow Slow Slow
                    Effect of sunlight Unprotected material crazes rapidly. Requires black for complete protection. Very Resistant Good Resistance Good Resistance
                    Effect of weak acids Varies Resistant Very Resistant Completely Resistant Resistant Very Resistant Poor Very Resistant Very Resistant
                    Effect of strong acids Varies Attacked by oxidizing acids Attacked slowly by oxidizing acids Resistant to oxidizing acids Resistant Poor Resistant Resistant
                    Effect of weak alkalies Cleaning Agent Resistant Very Resistant Completely Resistant Resistant Very Resistant Poor Resistant Resistant
                    Effect of strong alkalies Etches Resistant Very Resistant Very Resistant Resistant Very Resistant Poor Resistant Resistant
                    Effect of organic solvents None Resistant (below 60°C) Resistant (below 80°C) Attacked by hydrocarbons and chlorinated hydrocarbons Resistant Swells in contact with hydrocarbons and chlorinated hydrocarbons Moderate Good Resistance to alcohols, aliphatic hydrocarbons and oils Good Resistance to alcohols, aliphatic hydrocarbons and oils
                    Machine qualities Fair Good Excellent Good Fair Fair Poor Poor Poor
                    Clarity (Natural Material) Translucent to opaque Translucent to opaque Translucent Translucent to opaque Opaque Clear to opaque Clear to opaque
                    Abrasion resistance Low Low Very Good Very Good

                    Properties* PVC Extrusion PETG Flex500** Static Conductive Static Dissipative LLDPE Nylon ABS
                    Mechanical Characteristics
                    Specific gravity (density) 1.2 1.3 1.35 1.06 1.17 0.925 g/cm3 1.13 g/cm33 1.05
                    Tensile strength, p.s.i. 2300 5800 2000 1000 1900 10 Mpa 50 Mpa 5990
                    Elongation, % 400 50 150 300 360 >500
                    Compressive strength, p.s.i. 7300
                    Tear strength (ASTM D1004) 185 270pli 200pli
                    Impact strength, ft. lb./in. of notch (1/2x1/2 in. notched bar, izod test) 0.19 – 0.66 No break 1.2 ft. - lb.In.
                    Hardness, Rockwell A60-70 (Shore) Shore R 108 15 Second Shore A84–94 15 Second Shore D 46 A55 – 65 Shore 47 (Shore D) 54 (Shore D) 109
                    Electrical Characteristics
                    Volume resistivity, ohm/cm3 (50% RH and 23°C) 100 Surface Resistivity 109 OHM/SQ 1018
                    Dielectric constant, 60 cyc. 3 – 4
                    Dissipation (power) factor, 60 cyc. 20 – 300 104
                    Service Temperatures
                    Continuous °C/°F 93/200 145°F 149/300 140°F 140°F 70/158 120/248
                    Intermittent °C/°F 177/350 160°F 260/500 160°F 160°F 90/194 180/356
                    Brittleness °C/°F -32/-26 -40°F <-90°F   <-70/158
                    Resistance Characteristics
                    Water absorp., 24 hr., 1/8" thick, % 0.1 to 0.2%
                    Burning rate (flammability), in./min. Slow Slow Slow Slow Very Slow UL 94 HB
                    Effect of sunlight Good Resistance Fair Resistance Good Resistance Very Resistant Good Resistance Limited Resistance Resistant
                    Effect of weak acids Very Resistant Very Resistant Resistant Very Resistant Resistant Not Resistant
                    Effect of strong acids Resistant Resistant Resistant Resistant Resistant Not Resistant
                    Effect of weak alkalies Very Resistant Very Resistant Resistant Very Resistant Resistant Resistant
                    Effect of strong alkalies Resistant Resistant Resistant Resistant Resistant Resistant
                    Effect of organic solvents Good resistance to alcohols, aliphatic hydrocarbons and oil Good Resistance Resistant Good Resistance Resistant Resistant
                    Machine qualities Poor Very Good Good Good Poor Good Good
                    Clarity (Natural Material) Clear to opaque Clear Opaque Opaque Translucent Translucent Opaque
                    Abrasion resistance Very Good Very Good Very Good Low Very Good

                    The data contained herein is for reference purposes only. This data represents typical properties and not product specifications.  For specific part or material information, please contact a Technical Sales Representative at 1.888.CAPLUGS.  For  alternate material options, please contact Customer Service.

                    *Properties of Caplugs® parts are subject to change without notification.

                    **Independent third party testing supports our published claims of Flex500® successfully performing under intermittent service temperatures of over 500°F.

                    The data contained herein is believed to be as accurate as reasonably possible, but Caplugs makes no warranty, express or implied, regarding this information.

                    © Protective Industries, Inc. 2019. The information contained herein is proprietary to Caplugs and may not be used or disseminated inappropriately.  All trademarks, except where noted, are property of Protective Industries, Inc.

                     

                    View PDF

                                      city

                                      Buddhism

                                      game

                                      Application Essentials

                                      Technology

                                      Technology

                                      culture

                                      culture

                                      game